1. Máquina de corte con láser de fibra características
1) Excelente calidade do feixe: menor diámetro de foco e alta eficiencia de traballo, alta calidade.
2) High cutting speed: cutting speed is more than 20m/min
3) Stable running: adopting the top world import fiber lasers, stable performance, and key parts can reach 100,000 hours;
4) Alta eficiencia para a conversión fotoeléctrica: Compare coa máquina de corte con láser de CO2, a máquina de corte con láser de fibra ten unha eficiencia de conversión fotoeléctrica tres veces
5) Low cost: Save energy and protect environment. Photoelectric conversion rate is up to 25-30%. Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine.
6) Baixo mantemento: a transmisión da liña de fibra non precisa reflectir a lente, aforrar custos de mantemento;
7) Operacións sinxelas: transmisión de liña de fibra, sen axuste do camiño óptico;
8) Efectos ópticos súper flexibles: deseño compacto, requisitos de fabricación compactos e fáciles de flexibilizar.
2. Máquina de corte con láser de fibra Application Industrial
Aplicado en procesamento de chapas, aviación, voo espacial, electrónica, electrodomésticos, pezas de metro, automóbil, maquinaria, compoñentes de precisión, buques, equipamentos metalúrxicos, ascensor, electrodomésticos, agasallos e artesanía, procesamento de ferramentas, adorno, publicidade, procesamento de metais estranxeiros diversos. industrias transformadoras de fabricación.
3. Máquina de corte con láser de fibra Materiais aplicables
Úsase principalmente para cortar aceiro carbono, aceiro silicio, aceiro inoxidable, aliaxe de aluminio, aliaxe de titanio, chapa de aceiro galvanizado, placa de decapado, placa de zinc de aluminio, cobre e moitos tipos de corte de materiais metálicos, etc.
4. Fiber Laser Cutting Machine Equipment Feature and Technical Advantages
1) High Speed: cutting speed is more than 20m/min;
2) High Performance: It is suitable for high reflecting material cutting, such as copper and aluminum.
3) High Efficiency: Excellent high cutting speed, low operating and use cost, double return on your investment.
4) Low Gas Cost: Use air to cut the thin stainless steel sheet, no need to use Nitrogen.
5) Low Energy Consumption: Save energy and protect environment. Photoelectric conversion rate is up to 25-30%. Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine.
6) Low Maintenance: Fiber transmission, no need reflect mirrors, no need to adjust optical path, laser source lifetime is more than 100,000 hours, almost free maintenance.
5. Máquina de corte con láser de fibra Parámetro técnico
Model type | 1325 | 1530 | 1640 |
Laser media | ND:FIBER | ND:FIBER | ND:FIBER |
Potencia | Standard 500W Optional 300W/1000W | Standard 500W Optional 300W/1000W | Standard 500W Optional 300W/1000W |
Wave lenth | 1080nm | 1080nm | 1080nm |
Min.route width | 0,1 mm | 0,1 mm | 0,1 mm |
Precisión de reposición | ± 0,05 mm | ± 0,05 mm | ± 0,05 mm |
Ancho de corte | 1300*2500 | 1500*3000 | 1600*4000 |
Espesor de corte | 8 mm | 8 mm | 8 mm |
Aiming positioning | Red dot | Red dot | Red dot |
Voltage requirement | 380V / 50Hz | 380V / 50Hz | 380V / 50Hz |
Forma de refrixeración | Refrixeración por auga | Refrixeración por auga | Refrixeración por auga |
Os nosos Servizos
We know for enterprises, quality is the life, so we have put the quality control into each link as products development, design, purchasing, processing, assembling and testing etc. Everybody in the company are participated into the quality management to prevent any unqualified products from being sent out.
Before delivery, each machine has been inspected through following steps:
100% quality testing, that is, each machine has been tested strictly in mechanical assembling and electrical performing before delivery;
100% sample testing, that is, each machine has been tested by the processed sample before delivery;
We always pursue the service philosophy of “ALL FOR CUSTOMERS”. The Advanced management system and perfect service system ensure that we can provide timely and efficient services and ensure product's stability in great extent, which supply a effective guarantee for the system normal operation.
FAQ
How long the machine can be shipped?
The machine will be produced according to the real order confirmation, you may kindly arrange 30% of total amount as deposit to confirm the order. When the machine will be ready around 14 working days, we will inform you, then you send balance of payment.
How about the warranty?
The complete set of machine within 14 months warranty period, consumable material like lens, cable, tools, laser tube, cover etc. Spindle motor within half a year warranty.
There are many company selling Suda machines, which one is real manfacturer?
We have many distributors in both China and outside of China, but manufacturer and research center only in Anhui. China.